The Powermax30® XP is a highly portable plasma cutting system that can handle a wide range of applications. A unique “two-in-one” design provides high-power capability for thick metal cutting, as well as the FineCut® consumables for detailed, thin metal cutting. The versatile 30 amp system uses air or nitrogen to cut electrically conductive metals, such as mild steel, stainless steel, or aluminum.
|Input voltages||120-240 V, 1-PH, 50/60 Hz|
|Input current @ 3.8 kW||120-240 V, 1-PH, 25-18.8 A|
|Output current||15-30 A|
|Rated output voltage||125 VDC|
|Duty cycle @ 40°C (104°F)||35%, 240 V
20%, 120 V
|Open circuit voltage (OCV)||256 VDC|
|Dimensions with handles||356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H|
|Weight w/ 4,5 m (15') torch||CSA: 9.7 kg (21.4 lbs)
CE, CCC: 9.5 kg (21 lbs)
|Gas Supply||Clean, dry, oil-free air or nitrogen|
|Recommended gas inlet
flow rate / pressure
|113.3 l/min (4 scfm) at 5.5 bar (80 psi)|
|Input power cable length||3 m (10')|
|Power supply type||Inverter - IGBT|
|Engine drive requirement||5.5 kW for full 30 A output|
|Certifications||CSA-certified for use in the Americas and Asia, except China
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.
|Warranty||Power supplies have a 3-year warranty and torches a 1-year warranty.|