TVC NFM2

You are here

NMF2
  • The NFM² is a compact, battery powered unit which takes measurement of shielding gas flow right at the welding nozzle for the most accurate measurement. The NFM² is available as either a standard or advanced model.
  • “Peashooter” gas flow meters are often situated upstream away from the welding nozzle and so cannot allow for any gas leakage in the pipework feeding the welding nozzle giving inaccurate readings of the useful gas flow. Measuring the gas flow at the nozzle using the NFM² gives the welder a measurement of gas flow actually being used. The unit has either a fixed inlet or an extension pipe for use on robots and automated machines where the nozzle is difficult to reach.
  • The NFM² is capable of measuring nozzle flow up to 100 litres/min (212 cfh) and is accurate for use on all shielding gases and gas mixes. The correct gas mix is user selectable from the preprogrammed list of nine of the most popular gas mixes. Customised and special gas mixes can be factory set.
  • Easy to read, illuminated, colour display gives clear indications of gas flow in poor light conditions and will display the peak gas flow for gas usage analysis. The NFM² will confirm gas usage is in compliance with the welding procedure and will significantly reduce shielding gas wastage, by confirming accurate gas flow rates at the welding torch.
  • The optional data logging facility (Advanced Unit Only) records flow results and surge data on the NFM² internal memory. Recorded data is downloaded from the NFM² via USB connection for direct import into the included data viewing and reporting software.
  • The NFM² output can be connected directly to any of the TVC range of ALX and ALXII welding data logging systems, giving a permanent record of measured gas flow. The unit is supplied with a selection of flexible nozzles to fit all popular welding torches, plus a rugged carry case, manual, PSU / battery charger and 12 months calibration certification traceable to The National Physical Laboratory.

The NFM² is available in either standard or advanced models.

Standard Model NFM² Geavanceerd model NFM²
Factory set in metric or imperial units. Factory set in metric or imperial units.
Colour display. Data logging facility.
Nine selectable gas mixes -
factory programmable for custom /
special gas mixes.
Colour display.
Multi-function connector
(Charging and output to ALX / ALXII
Welding Data Logger).
Nine selectable gas mixes -
factory programmable for custom /
special gas mixes.
  Multi-function connector
(Charging and output to ALX / ALXII
Welding Data Logger).

 

AttachmentSize
964.32 KB
Ask quotation